Contact Us
Mobile:0086 136 7190 7546
Tel:0086 136 7190 7546
Fax:0086 21 6148 1425
QQ:2668964952
Email:sales@kin-auto.com
Add:No.1869, Youyi Road Baoshan District, Shanghai, China

   

How to use Air Suspension Springs correctly

The appearance of the air spring improves comfort of the vehicle largely, but in order to ensure the air spring bring us a long-term good experience, we should use it correctly. Today we will learn about the basic requirement of air suspension springs used in bus.


1. According to experience, the vehicle with air suspension should be run on the pavement second class or above. When running on bad road surface, it is necessary to slow down the speed, generally not more than 30 km/h.


2. For buses with air suspension springs, it is not allowed to overload and must be loaded in accordance with the vehicle's limited load strictly. Overloading is not more than 10% even if running on good condition roads such as highways and first-class road.


3. Gas supply pressure of suspension system should be kept between the 6.1~8bar.


4. Rubber parts in air springs (except polyurethane parts) prohibit using and contacting lubricating oil, grease


5. In case of a small fault, such as air pipe leakage or accidental damage to the airbag, etc., the bus should be derived at low speed to the nearest service station for repairing as soon as possible


In addition to the above basic requirements, air Springs also need inspection and maintenance daily. 


Hits:    【Print

Online Service 
业务咨询
技术支持
客服咨询
Welcome!